Waterproofing Membrane

APPLICATION AREA

• Water tanks, reservoirs, swimming pools
• Roofs and terrace of all types of low and high rise building
• To protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases

APPLICATION PROCEDURE

• Mix POLYCOTE BB powder in POLYCOTE BB liquid thoroughly in given proportion. Apply on prepared surface with the help of roller / brush. Priming is necessary to get high durable waterproofing system.

ADVANTAGES

• Minimum surface preparation needed low labor costs
• Applied directly to the damp concrete and masonry
• Excellent adhesion bonds to porous and nonporous surfaces
• Non-toxic-ideal for potable water tanks
• Excellent for damp-proofing basements

APPLICATION AREA

• Water tanks, reservoirs, swimming pools
• Roofs and terrace of all types of low and high rise building
• To protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases

APPLICATION PROCEDURE

• Mix POLYCOTE BB powder in POLYCOTE BB liquid thoroughly in given proportion. Apply on prepared surface with the help of roller / brush. Priming is necessary to get high durable waterproofing system.

ADVANTAGES

• Minimum surface preparation needed low labor costs
• Applied directly to the damp concrete and masonry
• Excellent adhesion bonds to porous and nonporous surfaces
• Non-toxic-ideal for potable water tanks
• Excellent for damp-proofing basements

APPLICATION AREA

• Water tanks, reservoirs, swimming pools


• Roofs and terrace of all types of low and high rise building


• To protects against concrete decay providing a long lasting barrier to waterborne corrosive

APPLICATION PROCEDURE

• Mix POLYCOTE BBX powder in POLYCOTE BBX liquid thoroughly in given proportion. Apply on prepared surface with the help of roller / brush. Priming is necessary to get high durable waterproofing system.

ADVANTAGES

• Minimum surface preparation needed low labor costs


• Applied directly to the damp concrete and masonry


• Excellent adhesion bonds to porous and nonporous surfaces


• Non-toxic-ideal for potable water tanks


• Excellent for damp-proofing basements

APPLICATION AREA

• Potable water retaining structures


• Potable water excluding structures


• Internal basement waterproofing


• Drainage culverts

APPLICATION PROCEDURE

• Mix thoroughly powder and liquid in given proportion than apply using brush/ roller on prepared surface.

ADVANTAGES

• Withstands high positive and negative hydrostatic pressures


• Excellent crack accommodation before and after immersion


• Approved for use in contact with potable water


• Excellent bond to concrete and masonry


• Long working life


• Easy application by brush, trowel or spray


• Bonds to green or damp concrete

APPLICATION AREA

• Reservoir, Canals, Water tanks, Terrace
• Podium and many more where waterproofing is prerequisite.

APPLICATION PROCEDURE

• Surface Preparation : All substrates must be sound, clean, dry, smooth and free from protrusions, voids, honey-comb, sand high spots. Presence of curing agents, paint and oil will impair adhesion.
• Moss and lichen must be removed & area treated with proprietary fungicidal wash to kill spores and inhibit further growth. Following treatment wash area thoroughly with clean water & allow drying. Fillets must be provided at corners or sharp angles using 4:1 sand and cement mortar modified with a good quality bonding agent BUTABOND SBR (SL).
• Priming: Priming is not normally required on good quality, well prepared substrates.
• Application: Apply SMARZKOT WATERGUARD using an airless spray to obtain a continuous, unbroken film. Water can be added up to 5-10% during application to adjust consistency based on temperature & humidity. Apply four coats, with each coat being applied after the previous one has dried.
• For application with Glass Reinforcement Sheet (GRS), first apply one coat of SMARZKOT WATERGUARD, then place the GRS on the applied material while the first coat is still wet. Roll a paint roller over the GRS to ensure it is bonded with the applied material, then apply the remaining coats of SMARZKOT WATERGUARD.`

ADVANTAGES

• Spray Application, easy to apply White Color Membrane
• High bulld properties ensures rapid application
• High elasticity, ensuring a permanently flexible barrier over a wide range of temperatures, Thermal Stability
• Screeding can be done easily over applied membrane after complete curing
• Suitable for Exterior application e.g. Terrace
• For Extended Life Waterproofing, application with GRS (Glass Reinforcement Sheet) is recommended
• Excellent adhesion & Good Crack bridging property
• Can be applied to range of substrates
• Out standing resistance to brittlement and oxidation
• Economical & High UV resistance
• Excellent heat reflection
• Provides excellent water tight structure