Silicorep Wr200 Silicone Based Water Repellent

APPLICATION AREA

• Natural and artificial stones
• Mangalore tiled roofs Corrugated AC sheet roofing, etc.
• Concrete, mortar Clay brick surfaces

APPLICATION PROCEDURE

• SILICOREP WR200 should be diluted with water ratio of 1:9 to 1:14.
• Apply one liberal coat of SILICOREP WR200 by brushing on the prepared surface. Dry the Surface minimum for 24hrs.
• Apply second coat wet on wet, to improve the penetration rate & performance.

ADVANTAGES

• Clear coating does not stain the treated surface
• Not change the appearance of exterior decorative coating
• Prevent efflorescence
• Due to low viscosity penetration is high, which provides the hydrophobic zone