vidushi.redwop@gmail.com - GST NO. : 24AAECR9443H1Z8
- Send Email
Construction Chemicals & Concrete Solutions
Leading Manufacturers, Exporters and Wholesaler of Epfloor mm2 2mm Thick Epoxy Self Leveling Flooring, Mattcem S3 Screed Concrete, Polycote WH Single Component Polymer for Cement, Polycote WH-100 Acrylic Transparent Coating for Exteriors, Polycote WH50 Single Component Acrylic Polymer, Redcure Wb Wax Based Curing Compound, Rediplast Ready Mix Plaster and Superkot Heavy Duty Reinforced Acrylic Waterproof Coating from Rajkot.
| Business Type | Manufacturer, Exporter, Supplier |
| Brand | Redwop |
| Mixed Appearance | Free Flowing Semi Fluid |
| Pot Life | Approx. 1 Hour |
| Compressive Strength | >50 N/mm² @ 7 Days |
| Abrasion Resistance | <0.1 Mm |
| Tensile Strength | >20 N/mm² @ 28 Days |
| Packaging | 17 Kg Set |
APPLICATION AREA
- Kitchens, food & beverage production
- Living room, Laboratories & clean room
- Industrial Floorings either bearing heavy load or general loadings
APPLICATION PROCEDURE
- Laitance deposits on new concrete are best removed by light grit blasting, mechanical scrabbling or grinding.
- All surfaces to be treated with EPFLOOR MM2 should be primed with PRIMER 25.
- Mix EPFLOOR MM2 flooring as per pre-weighed packs (base, hardener, aggregate & color pack) which are ready for immediate on-site mixing.
- It should be spread to the required thickness using a serrated trowel with care taken not to overwork the resin, spreading evenly and slowly. Immediately after laying, the material should be rolled, using a spiked nylon roller to remove slight trowel marks and to assist air release.
ADVANTAGES
- Fast application will minimizes downtime
- Good resistance to a wide range of chemicals
- Good abrasion resistance create durable floors
| Business Type | Manufacturer, Exporter, Supplier |
| Brand | Redwop |
| Packaging | 500 Gms Pouch |
| Working Time | 50 Min |
| Installation Temperature | >10 °C |
| Humidity | <70% |
| Fresh Mortar | 2.275 Kg/1 |
| Compression Testing | >35 N/mm² At 28 Days |
| Flexural Testing | >3.0 N/mm² At 28 Days |
| Pull Of Adhesion Testing | >2.00 MPa At 14 Days |
USES
- Mattcem S3 modified screeds are ideally suited for screeding large floor areas where in speedy execution of work can enable subsequent activity to be carried out, saving time and money.
- Some examples of application areas are:
- Airport Terminals, Public spaces & Shopping Mall
- University RCC flooring reworks or screeding works
APPLICATION PROCEDURE
- Prepare the screed as per mixing ratio.
- MATTCEM S3: OPC S3G Cement:
- Sand: Water
- 500gm : 50kg : 65kg: 22kg
- Pour the mixed screed mortar onto the prepare surface using with a steel flat trowel.
ADVANTAGES
- Early drying compared to traditional cement sand screed
- Reduced drying times: For bonded screed, tiles like ceramic can be laid after 24 hours using Proprietary adhesive.
- After 7 days dry, it is ready to receive natural stones, textile floor coverings, parquet flooring and resin coatings
- For interior & exterior use, Easier spreading & working of the screed
- Longer smoothing and floating time, No water curing is required but protection with PE-foil sheet recommended
| Business Type | Manufacturer, Exporter, Supplier |
| Packaging Type | 1,5,20,50 & 200 Lit. Pack |
| Color | White |
| Form | Liquid |
| Brand Name | Redwop |
| Pot Life | Approx 4 Hours |
| Coverage | 16 To 17 M² / Lit. |
APPLICATION AREA
- Roofs, terraces, toilet, bathrooms, resorviors, canals etc.
- Exterior walls
- Reservoirs and channels
- End walls subjected to rain in all low and high rise buildings
APPLICATION PROCEDURE
- Mix POLYCOTE WH, water and cement in ratio of (1:2:4) then apply the paste using brush over the prepared surface.
ADVANTAGES
- Ease in application
- Excellent adhesion to most of the exterior surfaces
- Balanced mechanical properties
- Gives excellent water Resistance
| Business Type | Manufacturer, Exporter, Supplier |
| Viscosity | 1000-2000 MPa.s |
| Packaging Size | 1,5,10,20 Lit. |
| Brand Name | Redwop |
| Appearance | Transparent Liquid |
| Solid Content | 50 ± 1% |
| Type Of Emulsion | Anionic |
| Coverage | 40-50 Ft²/Lit. |
APPLICATION AREA
- Roofs and terraces
- Exterior walls
- Reservoirs and channels
- End walls subjected to rain in all low & high rise buildings
APPLICATION PROCEDURE
- Shake well before use and directly apply using Brush/Roller on prepared surface.
ADVANTAGES
- Tough & non yellowing under harsh environment
- Excellent adhesion to most of the exterior surfaces
- Balanced mechanical properties
- Gives excellent water Resistance
| Business Type | Manufacturer, Exporter, Supplier |
| Brand Name | Redwop |
| Packaging Size | 20,50 & 200 Lit. |
| Appearance | White Liquid |
| Specific Gravity | 1.02 To 1.05 |
| Pot Life | 30 Min @ 30°C |
| Coverage | 16 To 17 M²/Lit. |
APPLICATION AREA
- Roofs, terraces and balconies as a sandwich layer
- Pools and fountains
- Reservoirs and channels
- End walls subjected to rain, Exterior Walls
APPLICATION PROCEDURE
- Mix POLYCOTE WH 50, water and cement in ratio of (1:2:4) then apply the paste using brush over the prepared surface.
ADVANTAGES
- Ease in application
- Excellent adhesion to most of the exterior surfaces
- Balanced mechanical properties
- Gives excellent water Resistance
| Business Type | Manufacturer, Exporter, Supplier |
| Packaging Type | 50 & 200 Lit. Containers |
| Drying Time | 2-3 Hours @27°C |
| Brand | Redwop |
| Appearance | Milky White Liquid |
| PH | 5 To 7 @27°C |
| Coverage | 50 To 60 Ft²/Lit. |
APPLICATION AREA
- RCC surface
- Column beam surface
- Pre-stressed structures
- Irrigation channels and all Civil Engineering structures
- Industrial floor slabs
APPLICATION PROCEDURE
- Stir thoroughly before use to ensure full dispersion of solids. Spray product in a fine mist to completely cover the concrete surface. Maintain the pressure in the application equipment to ensure a consistent spray.
COMPLIANCE STANDARD
- BS 7542, ASTM C309
- ADVANTAGES
- Single application
- No other curing necessary
- Reliable
- Ensure hard-wearing surface
- Easy and spray application
| Business Type | Manufacturer, Exporter, Supplier |
| Packaging Size | 40 Kg Bags |
| Color | Grey |
| Application | Interior And Exterior Walls |
| Brand Name | Redwop |
| Form | Powder |
| PH | 7 to 8 |
| Specific Gravity | 2.1 kg/lit |
APPLICATION AREA
- AAC, Fly Ash, Clay Brick, Stone & Concrete block walls
- Concrete Surfaces
APPLICATION PROCEDURE
- Cleaning brickwork: Small trial area should be cleaned with suitable RECLEANER should be selected and rubbed.
- Cleaning large items of equipment: Liberally apply to the deposits by a soft broom and allow to soak overnight.
- Cleaning small tools: Use as a dip. The tools should be soaked
- overnight, then taken out and washed with clean water to remove all loosely adhering materials
- Cleaning concrete floors: In Pre-wet the floors use a stiff bristle broom, brush the affected areas with RECLEANER.
ADVANTAGES
- High compressive and tensile strength increases masonry strength and load-bearing capacity
- Provides smooth finish walls even in a single coat
- Excellent Surface finish
| Business Type | Manufacturer, Exporter, Supplier |
| Packaging Type | 1,5,10,20 Lit. Bucket |
| Form | Liquid |
| Color | White |
| Material | Reinforced Acrylic |
| Brand Name | Redwop |
| Elongation | > 150% |
| Surface Dry Time | 30 Min |
| Recoating Interval | 4 To 5 Hours @ 30°C |
| Coverage | 2m² Per Liter Per Coat |
APPLICATION AREA
- Building Roofs / Terraces- Flat & Slope
- RCC Structure, Masonry Walls of all types low & high rise buildings
- Cooling Tower & Bridges
APPLICATION PROCEDURE
- Shake well before use and directly apply using Brush/ roller on prepared surface.
ADVANTAGES
- Provides higher dry film thickness of minimum 1 mm in three coat application & Good Crack capacity
- Can be used for flat as well as sloping roofs
- It is Breathable
- UV resistance with excellent waterproofing capacity
- Nontoxic and ecofriendly as it is lead free
