vidushi.redwop@gmail.com - GST NO. : 24AAECR9443H1Z8
- Send Email
Water Repellent
Leading Manufacturers, Exporters and Wholesaler of Silcore WR100 Silicone Based Water Repellent for Exterior, Silicorep S500 Colorless Solvent Based Water Repellent and Silicorep Wr200 Silicone Based Water Repellent from Rajkot.
| Business Type | Manufacturer, Exporter, Supplier |
| Packaging Size | 1,10,20,50 & 200 Ltr. |
| Brand Name | Redwop |
| Appearance | Pale Yellow Liquid |
| Specific Weight | 1gm/ml @30°C |
| Dry Time | 20 To 30 Min |
| PH | 7 To 8 |
APPLICATION AREA
- Natural and artificial stones
- Mangalore tiled roofs Corrugated AC sheet roofing, etc.
- Concrete, mortar Clay brick surfaces
APPLICATION PROCEDURE
- SILICOREP WR100 should be diluted with water ratio of 1:9 to 1:14.
- Apply one liberal coat of SILICOREP WR100 by brushing on the prepared surface. Dry the Surface minimum for 24hrs.
- Apply second coat wet on wet, to improve the penetration rate & performance.
ADVANTAGES
- Clear coating does not stain the treated surface
- Not change the appearance of exterior decorative coating
- Prevent efflorescence
- Due to low viscosity penetration is high, which provides the hydrophobic zone
| Business Type | Manufacturer, Exporter, Supplier |
| Packaging Size | 1,10,20,50 & 200 Ltr. |
| Brand Name | Redwop |
| Appearance | Pale Yellow Liquid |
| Specific Weight | 1gm/ml @30°C |
| Dry Time | 20 To 30 Min |
| PH | 7 To 8 |
APPLICATION AREA
- To get Water repellent surface
- To get Self-cleaning properties
- To reduce efflorescence
APPLICATION PROCEDURE
- Apply one liberal coat of SILICOREP S500 by brushing on the prepared surface. Dry the Surface minimum for 24hrs.
- Apply second coat wet on wet, to improve the penetration rate & performance.
ADVANTAGES
- Equally effective on old or new surfaces
- Protects brickwork
- Protects concrete
- Self-cleaning
| Business Type | Manufacturer, Exporter, Supplier |
| Brand Name | Redwop |
| Packaging Size | 1, 10, 20, 50 & 200 Ltr. |
| Appearance | Pale Yellow Liquid |
| Specific Weight | 1gm/ml @30°C |
| Dry Time | 20 To 30 Min |
| PH | 7 To 8 |
APPLICATION AREA
- Natural and artificial stones
- Mangalore tiled roofs Corrugated AC sheet roofing, etc.
- Concrete, mortar Clay brick surfaces
APPLICATION PROCEDURE
- SILICOREP WR200 should be diluted with water ratio of 1:9 to 1:14.
- Apply one liberal coat of SILICOREP WR200 by brushing on the prepared surface. Dry the Surface minimum for 24hrs.
- Apply second coat wet on wet, to improve the penetration rate & performance.
ADVANTAGES
- Clear coating does not stain the treated surface
- Not change the appearance of exterior decorative coating
- Prevent efflorescence
- Due to low viscosity penetration is high, which provides the hydrophobic zone
