Repair Mortar

APPLICATION AREA

• AAC blocks joining works
• Stretcher block, Corner block, Pillar block joining works
• Red bricks

APPLICATION PROCEDURE

• Mix approx. 11.2 liter of water in 40 kg powder and make a consistence workable paste and start applying to join blocks with the help of notch trowel to ensure good bonding. It will bond 40 blocks (900mm x 200mm x 150 mm) in 40 kg bag.

ADVANTAGES

• Highly durable
• Resistance to rain and other harsh environment condition
• Long lasting and resistance to discoloration
• High coefficient of cohesion
• Resistance to gasoline and water
• Quick drying

APPLICATION AREA

• Vertical and overhead repairs
• General concrete and masonry repairs
• Voids greater than 10 mm deep

APPLICATION PROCEDURE

• Mix thoroughly MICROCONE RGL powder and water in water cement ratio in 0.18.

ADVANTAGES

• Saving time and expense of multiple applications
• Obviates the need for formwork
• Polymer-modification provides extremely low permeability to water, carbon dioxide and chlorides.
• Excellent bond to the concrete substrate

APPLICATION AREA

• For repairs to damaged reinforced concrete elements particularly where access is restricted and where vibration of the placed material is difficult or impossible
• Suitable for various structural strengthening measures such as filling honeycombs and cracks

APPLICATION PROCEDURE

• Mix thoroughly MICROCONE RGL powder & water in water cement ratio in 0.16 to 0.18 & apply using pump on the prepared surface.

ADVANTAGES

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state
• Can be pumped or poured into restricted locations
• Highly fluid to allow for placement without vibration
• Pre-packed to overcome site-batched variations

APPLICATION AREA

• For repairs to damaged reinforced concrete elements
• For various structural strengthening measures

APPLICATION PROCEDURE

• Add MICROCONE M90 bag into forced-action mixture & then add Required amount of water & mix properly to make slurry & Paste it.

ADVANTAGES

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
• Highly fluid to allow for placement without vibration.
• Low permeability, Economical
• Contains no chloride

APPLICATION AREA

• Repair deteriorated underwater or tidal zone Concrete Structures
• Quay Pillars, Bridge columns, Concrete Piling, Dams

APPLICATION PROCEDURE

• Open MICROCONE UW Bag into mixture & add required amount of water slowly it While Mixing.
• Mix it properly for 5 min until smooth paste is Obtain & Place it.

ADVANTAGES

• Displaces Water Effectively
• Low Porosity
• High Bond Strength
• Increase Durability

APPLICATION AREA

• Rapid temporary patching and plugging of concrete segments
• Concrete and brick tunnel linings
• Sewage systems
• Foundations and mines

APPLICATION PROCEDURE

• PLUGFAST should be added to clean water & Mix to a stiff consistency in a suitable container using a trowel or gloved hand.
• Trowel apply or hand-knead the mixed mortar in place, ensuring maximum contact with the substrate before the material sets.

ADVANTAGES

• Emergency water stopping capability
• Excellent bond to the substrate
• Low exothermal minimizes thermal cracking
• Contains no chloride admixtures

APPLICATION AREA

• To repair damaged horizontal concrete elements airport runways, expressways, highways, bridge decks, sidewalks, parking decks, loading docks and floor.
• In vertical concrete repairing works after doing proper formwork.

APPLICATION PROCEDURE

• QUIKSET PRM 4H13 is thoroughly mixed in a forced-action mixer of adequate capacity. The quantity water required will generally be between 3.5 to 3.75 liters per 25 kg bag of QUIKSET PRM 4H13.

ADVANTAGES

• Ease in application
• High early strength and fast setting
• Pre-packed to overcome site-batched variations.
• Excellent adhesion property with old concrete substrate
• Economical and durable