http://www.redwopchemicals.co.in Latest Products Sat, 25 Apr 2026 17:27:54 +0530 en-us http://www.redwopchemicals.co.in http://www.redwopchemicals.co.in/tile-adhesive.htm http://www.redwopchemicals.co.in/tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/industrial-grouts.htm http://www.redwopchemicals.co.in/industrial-grouts.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/concrete-admixture.htm http://www.redwopchemicals.co.in/concrete-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/construction-chemicals-concrete-solutions.htm http://www.redwopchemicals.co.in/construction-chemicals-concrete-solutions.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/waterproofing-agent.htm http://www.redwopchemicals.co.in/waterproofing-agent.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/waterproofing-membrane.htm http://www.redwopchemicals.co.in/waterproofing-membrane.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/protective-coating.htm http://www.redwopchemicals.co.in/protective-coating.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/wall-putty-paints.htm http://www.redwopchemicals.co.in/wall-putty-paints.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/repair-mortar.htm http://www.redwopchemicals.co.in/repair-mortar.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/floor-coating.htm http://www.redwopchemicals.co.in/floor-coating.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/anchosine-p-fix-polyester-resin-anchoring-grout.htm http://www.redwopchemicals.co.in/anchosine-p-fix-polyester-resin-anchoring-grout.htm Fri, 17 Apr 2026 00:00:00 +0530 ANCHOSINE P FIX is a two component polyester anchoring grout supplied in pre-measured quantities. The material cures quickly to give consistent, high performance anchorages. http://www.redwopchemicals.co.in/teratile-classic-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-classic-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 Advantages Non-shrink and waterproof Submerged conditions and internal application Long time workable Good slipresistance High adhesive bond strength Early strength gain   Substrate : RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Porcelain tile, Ceramic tile & high porous stone etc. Use in damp and totally submerged conditions Applicable of tiles size250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm Sand stones , mint stones in internal application Internal applications http://www.redwopchemicals.co.in/teratile-silver-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-silver-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 Advantages Non-shrink and waterproof Submerged conditions and internal application Workable with open wet time of 20 minutes at temp. 30° Good slip resistance High adhesive bond strength Early strength gain   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile over cement based mosaic tile, stone   Uses Porcelain tile, Vitrified tile, Ceramic tile & medium porous stones etc. Use in damp and totally submerged conditions Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm Sand stones , mint stones in internal application Internal applications http://www.redwopchemicals.co.in/teratile-gp-polymer-based-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-gp-polymer-based-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 Advantages Polymer modified Excellent adhesion on smooth surfaces Forms a dense and impermeable mortar bed Self-cure   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Ceramic external application, Vitrified internal application, Porcelain & porous stones Permanent fixing of tiles over smooth surfaces For specialized applications such as tile on tile and tile-on-glass etc. Applicable of tiles size 250mmX400mm,300mX3400mm,300mmX600mm,300mmX900mm 300mmX300mm http://www.redwopchemicals.co.in/teratile-gold-high-polymer-based-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-gold-high-polymer-based-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 Advantages Polymer modified Excellent adhesion on smooth surfaces Forms a dense and impermeable mortar bed Self-cure   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Note : *For Tile on tile application system may vary of adhesive standard, before application please contact Redwop technical team. We recommend product as per substrate and finish material.   Uses Porcelain tile Vitrified tile Ceramic tile Low porous stones Interior floor and wall applicable of tiles size250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm,600X1200mm Sand stone, Lapato, Lime stones, Granite & marbles in internal application http://www.redwopchemicals.co.in/teratile-mp-high-polymer-based-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-mp-high-polymer-based-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 Advantages Suitable for fixing ceramic tiles for floor and wall Polymer modified adhesive Good strength Easy mixing and application   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Tile claddings Porcelain tile Vitrified tile Low porous stones Applicable of tiles size250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, [600X1200mm@internal] Domestic and Industrial Application Sand stone, khatu, Lapato, Quartz, Lime stones, Granite & marbles in internal application http://www.redwopchemicals.co.in/teratile-sinex-high-polymer-based-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-sinex-high-polymer-based-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 TERATILE SINEX tile adhesive, is suitable for fixing at 3-6mm bed thickness (can be extended up to 15mm in area of limited extent) wall and floor tiles, mosaics, vitrified and fully vitrified tiles, marble, terrazzo and natural stone. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.   Advantages Polymer modified Excellent adhesion on smooth surfaces Forms a dense and impermeable mortar bed Self-cure   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Porcelain tile Vitrified tile Ceramic tile Low porous stones Interior floor and wall Applicable of tiles size 250mmX400mm, 300mmX300mm, 300mmX400mm, 300mmX600mm, 300mmX900mm, 600X1200mm Sand stone, khatu, Lapato, Lime stones, Granite & marbles in internal application http://www.redwopchemicals.co.in/teratile-diamond-high-polymer-based-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-diamond-high-polymer-based-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 TERATILE DIAMOND cementitious powder available for fixing of ceramic and vitrified tiles for floor &wall. The set adhesive is water resistant and is suitable for use in showers and totally immersed situations such as swimming pools.   Advantages Suitable for fixing ceramic tiles for floor and wall Polymer modified adhesive Good strength Easy mixing and application   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Note : *Mix 50% polymix for engineered stones   Uses Tile claddings Porcelain tile Vitrified tile Mosaic tiles Low porous stones Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm300mmX900mm, 600X1200mm, 1000mm X1000mm Sand stone, khatu, Lapato, Quartz*, Lime stones, Granite, Mint stone & marbles in internal application http://www.redwopchemicals.co.in/teratile-platinum-polymer-modified-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-platinum-polymer-modified-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 TERATILE PLATINUM cementitious powder available for fixing of ceramic and vitrified tiles for floor & wall. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.    Advantages Suitable for fixing ceramic tiles for floor and wall Polymer modified adhesive Good strength Easy mixing and application Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Note: Mix 50% polymix for engineered stones  For Tile on tile application system may vary of adhesive standard, before application please contact Redwop technical team. We recommend product as per substrate and finish material.   Uses Tile claddings Porcelain tile Vitrified tile Low porous stones Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, [600X1200mm @internal] Sand stone, khatu, Lapato, Quartz *, Lime stones, Granite, Elevation stone, Rajasthan black stone & Marbles in internal application http://www.redwopchemicals.co.in/teratile-prolix-polymer-modified-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-prolix-polymer-modified-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 TERATILE PROLIX cementitious powder available for fixing of ceramic and vitrified tiles for floor & wall. The set adhesive is water-resistant and is suitable for use in showers and totally immersed situations such as swimming pools.    Advantages Very High Polymer modified Very High performance and strength Excellent Water & frost resistance Excellent tensile & shear adhesion   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Tile claddings, Porcelain tile, Vitrified tile & Low porous stones etc. Applicable of tiles size 250mmX400mm,300mX300mm,300mmX400mm,300mmX600mm 300mmX900mm, 600X1200mm, 1000X1000mm Domestic and Industrial Application External and internal application Sand stone, khatu, Lapato, Quartz, Lime stones, Granite, Elevation stone, Rajasthanblack stone, Composite stone, Glass white & Marbles in internal application http://www.redwopchemicals.co.in/teratile-prolix-extra-premium-grade-high-strength-tile-adhesive.htm http://www.redwopchemicals.co.in/teratile-prolix-extra-premium-grade-high-strength-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 TERATILE PROLIX EXTRA is a cementitious powder available for fixing of vitrified tiles for floor & wall. The set adhesive is water resistant and is suitable for use in showers and totally immersed situations such as swimming pools.   Advantages Very High Polymer modified Very High performance and strength Excellent Water & frost resistance Excellent tensile & shear adhesion   Substrate: RCC, cement sheet, Plaster, AAC blocks, tile on tile, stone   Uses Tile claddings, Porcelain tile, Vitrified tile & Low porous stones etc. Domestic and Industrial Application Applicable of tiles size 250mmX400mm, 300mX300mm, 300mmX400mm, 300mmX600mm 300mmX900mm, 600X1200mm, 1000mm X1000mm, 1200x2400mm. External and internal application External and internal application Sand stone, khatu, Lapato, Quartz, Lime stones, Granite, Elevation stone, Rajasthanblack stone, Composite stone, Glass white & Marbles in internal application http://www.redwopchemicals.co.in/teratile-t-bond-cement-adhesive.htm http://www.redwopchemicals.co.in/teratile-t-bond-cement-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 TERATILE T-BOND is a highly polymer modified, cementitious adhesive, that can be used in slurry form, on wet screed, for wet-on-wet fixing of tiles and stones, as well as an adhesive paste for fixing tiles and stones on floor and wall.   Advantages Pre-wetting of tiles not required and hence less prone to cracking of mortar. User friendly application. Good adjustability time and high water retention even at elevated temperature. Excellent adhesion on smooth surfaces. Develops high adhesive bond strength.   Uses On-site mix additive to be mixed with cement, for fixing of tiles. To get good workability. To get sufficient sag resistance as well as appropriate setting time. To make cement self-cured. Tile fixing on all types of low and high rise building http://www.redwopchemicals.co.in/flexoplus-epoxy-tile-adhesive.htm http://www.redwopchemicals.co.in/flexoplus-epoxy-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 FLEXOPLUS develops highly elasticity and thixotropic paste making it safe to lay water-sensitive ceramic tiles and natural stone even diagonally or from top to bottom on highly deformable and expandable, absorbent and non-absorbent substrates like cement-based screeds, prefabricated concrete or fresh concrete castings, cement plasters and cement-lime mortar, floors and walls in polyurethane resin, glazed tiles, cement-based and resin floor tiles, porcelain tiles, wood, metals, rubber, PVC, linoleum etc.   Advantages Chemical resistance Suitable for super architectural structure Suitable for all types of tiles and stone laying Suitable for all types of substrate either absorbent or non-absorbent Better adhesion properties Flooring and walls, for internal and external use, in domestic, commercial and industrial applications, for street furniture, heated subfloors also in areas subject to thermal shockand freezing   Uses High-elasticity paste laying of ceramic tiles and vitrified tiles Laying porcelain tiles, marble and natural stone, on floors and walls, on absorbent and non- absorbent and deformable substrates http://www.redwopchemicals.co.in/low-ce-grout-injection-grout.htm http://www.redwopchemicals.co.in/low-ce-grout-injection-grout.htm Fri, 17 Apr 2026 00:00:00 +0530 LOW CE GROUT is a one component, non-shrink, waterproof, OPC Free, Lime Based injection mortar / grout, which can be used as a fill material and to stabilize voids for a variety of repair operations, in old or Heritage structures, where the need for a reasonably waterproof fill material exists. LOW CE GROUT ensures controlled strength development and excellent bond to offer a restored substrate that can be utilized in a reasonably short time and a reasonably, waterproof and crack free protection is obtained.   Advantages Non-Shrink, Waterproof, Crack Resistant & OPC Free Breathable Lime based binder for Heritage Structures Reasonably waterproof and water resistant Needs minimal curing, air cures by lime carbonation Non segregating, stable Traditional Lime based system, incorporating modern chemistry for easy application Can be Customised to site requirements   Uses Ready to use, just mix water and apply Used as a injection grout, fill material or as a binder for different applications in soil stabilization or heritage repair As a fill material between masonry walls As injection grout into damaged masonry walls As a binder for heritage fill mortars or lime terracing http://www.redwopchemicals.co.in/expa-200-injection-grout.htm http://www.redwopchemicals.co.in/expa-200-injection-grout.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREAt Bed plate grouing, Duct grouting Grouting tunnel lining Grouting in bridge structures Non-shrink infilling grouts Post tensioned cables  APPLICATION PROCEDURE It shall be ensured that areas to be grouted are clean, sound, and then pre wetted. The unrestrained surface area of the grout must be kept ton a minimum. The selected water content should be accurately measured into the mixer. The cement (& sand if required) shall be slowly added to EXΡΑ 200. Mixing shall be continued for 5 minutes, making sure that a smooth even consistency is obtained. The grout shall be placed within 20 minutes of mixing to gain the full benefit of the expansion process. Usual placing or pumping procedures shall be adopted ensuring a continuous operation.  ADVANTAGES Low water to cement ratio ensures low permeability and long term performance. Chloride free, aluminum, sulphide & sulphate, Iron free. Low permeability and long term durability in service http://www.redwopchemicals.co.in/injectofil-low-viscous-epoxy-injection-resin-grout.htm http://www.redwopchemicals.co.in/injectofil-low-viscous-epoxy-injection-resin-grout.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Injecting into cracks, honeycombs and cavities in concrete structures & structural cracks Grouting base plates with very narrow gaps (<10mm)   APPLICATION PROCEDURE The two components of INJECTOFIL shall be individually stirred and then mixed and injected into the nipples through a suitable injection pump exerting a uniform pressure.   ADVANTAGES Low viscosity can help injecting into fine cavities and narrow gaps It has high tensile and compressive strength which ensure long life span of structure High mechanical strength grout will performs even under heavy loads and stresses Excellent adhesive strength High range of chemical resistant performance http://www.redwopchemicals.co.in/butabond-sbrl-styrene-butadiene-latex-waterproofing-agent.htm http://www.redwopchemicals.co.in/butabond-sbrl-styrene-butadiene-latex-waterproofing-agent.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Repair of cracks and waterproof plastering for masonry structures and Prevents leakage & dampness Liquid & effluent tanks, car deck and walk ways repair works Masonry and RCC members ADVANTAGES Ease in application as it is one component It prevents cracking by improving flexural strength Reduces drying & aging shrinkage cracks which ultimately decrease permeability Excellent bond to concrete, masonry, stone work, plasters, steel, asphalt & most of the building materials http://www.redwopchemicals.co.in/polycote-wh-single-component-polymer-for-cement.htm http://www.redwopchemicals.co.in/polycote-wh-single-component-polymer-for-cement.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Roofs, terraces, toilet, bathrooms, resorviors, canals etc. Exterior walls Reservoirs and channels End walls subjected to rain in all low and high rise buildings APPLICATION PROCEDURE Mix POLYCOTE WH, water and cement in ratio of (1:2:4) then apply the paste using brush over the prepared surface. ADVANTAGES Ease in application Excellent adhesion to most of the exterior surfaces Balanced mechanical properties Gives excellent water Resistance http://www.redwopchemicals.co.in/polycote-wh50-single-component-acrylic-polymer.htm http://www.redwopchemicals.co.in/polycote-wh50-single-component-acrylic-polymer.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Roofs, terraces and balconies as a sandwich layer Pools and fountains Reservoirs and channels End walls subjected to rain, Exterior Walls APPLICATION PROCEDURE Mix POLYCOTE WH 50, water and cement in ratio of (1:2:4) then apply the paste using brush over the prepared surface. ADVANTAGES Ease in application Excellent adhesion to most of the exterior surfaces Balanced mechanical properties Gives excellent water Resistance http://www.redwopchemicals.co.in/polycote-wh-100-acrylic-transparent-coating-for-exteriors.htm http://www.redwopchemicals.co.in/polycote-wh-100-acrylic-transparent-coating-for-exteriors.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Roofs and terraces Exterior walls Reservoirs and channels End walls subjected to rain in all low & high rise buildings APPLICATION PROCEDURE Shake well before use and directly apply using Brush/Roller on prepared surface. ADVANTAGES Tough & non yellowing under harsh environment Excellent adhesion to most of the exterior surfaces Balanced mechanical properties Gives excellent water Resistance http://www.redwopchemicals.co.in/polycote-wh-crete-100-acrylic-modified-waterproofing-agent.htm http://www.redwopchemicals.co.in/polycote-wh-crete-100-acrylic-modified-waterproofing-agent.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Roofs, terraces and balconies as a sandwich layer Pools and fountains Reservoirs and Channels End walls subjected to Rain Exterior Walls APPLICATION PROCEDURE 1 part of POLYCOTE WH CRETE: 2 parts of Water: 4 parts of Cement, Mix properly & Apply using Brush. ADVANTAGES Ease in application Excellent adhesion to most of the exterior surfaces Excellent result on microbial resistance Gives excellent water Resistance http://www.redwopchemicals.co.in/polycote-bb-acrylic-polymer-modified-elastomeric-waterproofing-membrane.htm http://www.redwopchemicals.co.in/polycote-bb-acrylic-polymer-modified-elastomeric-waterproofing-membrane.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Water tanks, reservoirs, swimming pools Roofs and terrace of all types of low and high rise building To protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases APPLICATION PROCEDURE Mix POLYCOTE BB powder in POLYCOTE BB liquid thoroughly in given proportion. Apply on prepared surface with the help of roller / brush. Priming is necessary to get high durable waterproofing system. ADVANTAGES Minimum surface preparation needed low labor costs Applied directly to the damp concrete and masonry Excellent adhesion bonds to porous and nonporous surfaces Non-toxic-ideal for potable water tanks Excellent for damp-proofing basements http://www.redwopchemicals.co.in/polycote-bbx-elastomeric-waterproofing-membrane.htm http://www.redwopchemicals.co.in/polycote-bbx-elastomeric-waterproofing-membrane.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Water tanks, reservoirs, swimming pools Roofs and terrace of all types of low and high rise building To protects against concrete decay providing a long lasting barrier to waterborne corrosive APPLICATION PROCEDURE Mix POLYCOTE BBX powder in POLYCOTE BBX liquid thoroughly in given proportion. Apply on prepared surface with the help of roller / brush. Priming is necessary to get high durable waterproofing system. ADVANTAGES Minimum surface preparation needed low labor costs Applied directly to the damp concrete and masonry Excellent adhesion bonds to porous and nonporous surfaces Non-toxic-ideal for potable water tanks Excellent for damp-proofing basements http://www.redwopchemicals.co.in/polycote-bb-extra-acrylic-polymer-modified-elastomeric-waterproofing-membrane.htm http://www.redwopchemicals.co.in/polycote-bb-extra-acrylic-polymer-modified-elastomeric-waterproofing-membrane.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Water tanks, reservoirs, swimming pools Roofs and terrace of all types of low and high rise building To protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases APPLICATION PROCEDURE Mix POLYCOTE BB powder in POLYCOTE BB liquid thoroughly in given proportion. Apply on prepared surface with the help of roller / brush. Priming is necessary to get high durable waterproofing system. ADVANTAGES Minimum surface preparation needed low labor costs Applied directly to the damp concrete and masonry Excellent adhesion bonds to porous and nonporous surfaces Non-toxic-ideal for potable water tanks Excellent for damp-proofing basements http://www.redwopchemicals.co.in/polycote-npw-acrylic-modified-cementitious-negative-positive-waterproofing-agent.htm http://www.redwopchemicals.co.in/polycote-npw-acrylic-modified-cementitious-negative-positive-waterproofing-agent.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Potable water retaining structures Potable water excluding structures Internal basement waterproofing Drainage culverts APPLICATION PROCEDURE Mix thoroughly powder and liquid in given proportion than apply using brush/ roller on prepared surface. ADVANTAGES Withstands high positive and negative hydrostatic pressures Excellent crack accommodation before and after immersion Approved for use in contact with potable water Excellent bond to concrete and masonry Long working life Easy application by brush, trowel or spray Bonds to green or damp concrete http://www.redwopchemicals.co.in/polycote-cwp-crystalline-capillary-waterproofing-system.htm http://www.redwopchemicals.co.in/polycote-cwp-crystalline-capillary-waterproofing-system.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Sewage Treatment Water treatment plants Tanks, Foundation, Tunnels & manholes Terrace garden, Balcony, Sun Shades APPLICATION PROCEDURE Mix POLYCOTE CWP powder and water in ratio of approx. W /C=0.3 and apply using brush. ADVANTAGES Penetrates concrete seals capillary tracts Contains no chloride Easy to apply http://www.redwopchemicals.co.in/superkot-heavy-duty-reinforced-acrylic-waterproof-coating.htm http://www.redwopchemicals.co.in/superkot-heavy-duty-reinforced-acrylic-waterproof-coating.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Building Roofs / Terraces- Flat & Slope RCC Structure, Masonry Walls of all types low & high rise buildings Cooling Tower & Bridges APPLICATION PROCEDURE Shake well before use and directly apply using Brush/ roller on prepared surface. ADVANTAGES Provides higher dry film thickness of minimum 1 mm in three coat application & Good Crack capacity Can be used for flat as well as sloping roofs It is Breathable UV resistance with excellent waterproofing capacity Nontoxic and ecofriendly as it is lead free http://www.redwopchemicals.co.in/primkote-aliphatic-acrylic-based-liquid-primer.htm http://www.redwopchemicals.co.in/primkote-aliphatic-acrylic-based-liquid-primer.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA All types of PCC, RCC, EPDM, PVC, bitumin and asphalts felts as waterproofing paints Precast concrete structure, roofs, balconies, terrace and verandas Bridge-decks, tunnels, stadium stands, water tanks, Marine structures and structure APPLICATION PROCEDURE Mix PRIMKOT well before use. Apply the mix with the help of brush on the prepared surface. ADVANTAGES UV resistance Excellent adhesion bonds to porous and nonporous surfaces Non-toxic-ideal for potable water tanks Excellent for concrete roof, leaking brick and masonry walls Good resistance to Carbon dioxide and Chloride ion diffusion http://www.redwopchemicals.co.in/smarzkot-classic-2k-elastic-waterproofing.htm http://www.redwopchemicals.co.in/smarzkot-classic-2k-elastic-waterproofing.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Roofs, Balconies, Terrace, Verandas, Bridge-Decks Tunnels, Stadium Stands, Water Tanks, Marine Structures APPLICATION PROCEDURE Mix powder and liquid in given proportion given in pre weighed pack and directly apply on prepare surface with the help of brush/ Roller. ADVANTAGES Breathable waterproofing coating excellent UV resistance properties Non-toxic-ideal for potable water tanks and other food manufacturing industrial Good resistance to Carbon dioxide and Chloride ion diffusion PACK SIZE 10 & 20 kg Set http://www.redwopchemicals.co.in/smarzkot-advanced-acrylic-liquid-membrane-elastic-waterproofing.htm http://www.redwopchemicals.co.in/smarzkot-advanced-acrylic-liquid-membrane-elastic-waterproofing.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Old and New Concrete, Roofs, Balconies, Terrace, Verandah, Bridge-Decks, Tunnels, Stadium Stands, Water Tanks, Marine Structures etc APPLICATION PROCEDURE Mix well before use in pre weighed bucket before application and directly apply on prepare surface with the help of brush/ Roller ADVANTAGES Low water vapor transmission excellent UV resistance properties Eco-Friendly Non-toxic content Anti-carbonation properties http://www.redwopchemicals.co.in/smarzkot-waterguard-elastomeric-waterproofing-membrane.htm http://www.redwopchemicals.co.in/smarzkot-waterguard-elastomeric-waterproofing-membrane.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Reservoir, Canals, Water tanks, Terrace Podium and many more where waterproofing is prerequisite. APPLICATION PROCEDURE Surface Preparation : All substrates must be sound, clean, dry, smooth and free from protrusions, voids, honey-comb, sand high spots. Presence of curing agents, paint and oil will impair adhesion. Moss and lichen must be removed & area treated with proprietary fungicidal wash to kill spores and inhibit further growth. Following treatment wash area thoroughly with clean water & allow drying. Fillets must be provided at corners or sharp angles using 4:1 sand and cement mortar modified with a good quality bonding agent BUTABOND SBR (SL). Priming: Priming is not normally required on good quality, well prepared substrates. Application: Apply SMARZKOT WATERGUARD using an airless spray to obtain a continuous, unbroken film. Water can be added up to 5-10% during application to adjust consistency based on temperature & humidity. Apply four coats, with each coat being applied after the previous one has dried. For application with Glass Reinforcement Sheet (GRS), first apply one coat of SMARZKOT WATERGUARD, then place the GRS on the applied material while the first coat is still wet. Roll a paint roller over the GRS to ensure it is bonded with the applied material, then apply the remaining coats of SMARZKOT WATERGUARD.` ADVANTAGES Spray Application, easy to apply White Color Membrane High bulld properties ensures rapid application High elasticity, ensuring a permanently flexible barrier over a wide range of temperatures, Thermal Stability Screeding can be done easily over applied membrane after complete curing Suitable for Exterior application e.g. Terrace For Extended Life Waterproofing, application with GRS (Glass Reinforcement Sheet) is recommended Excellent adhesion & Good Crack bridging property Can be applied to range of substrates Out standing resistance to brittlement and oxidation Economical & High UV resistance Excellent heat reflection Provides excellent water tight structure http://www.redwopchemicals.co.in/mattcem-c310-p-self-levelling-cement-flooring.htm http://www.redwopchemicals.co.in/mattcem-c310-p-self-levelling-cement-flooring.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION PROCEDURE Laitance deposits on new concrete are best removed by light grit blasting, mechanical scrabbling or grinding. The primer should be allowed to dry forming a barrier, preventing air rising through the subfloor to form bubbles in the surface. Mix 20 kg bag of MATTCEM CL30 P with 4.5 to 5 liters of water with the help of mechanical mixer and continue until a smooth creamy consistency is obtained. Pour the prepared mix onto the substrate, spread quickly with trowel or preferably with a notched rubber squeegee & allow to self-level. Leave the surface for full cure. ADVANTAGES Less time consumption as it is self-leveling and provide better finishing to all types of floor surface Easy to use, we have to add only measured quantity of water to make paste It does not shrink or crack and reaches a high level of compressive and flexural strength and resistance abrasion Rapid Hardening enables early fixing of floor coverings. APPLICATION AREA To get smooth surface ready to receive textile, PVC, linoleum and rubber coverings as well as ceramic tiles In areas where high resistance to static and dynamic loads is required  http://www.redwopchemicals.co.in/whitplast-rf-leveling-putty.htm http://www.redwopchemicals.co.in/whitplast-rf-leveling-putty.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Smoothing of walls for both indoor and outdoor Renders a smooth and durable surface Under layer for all kinds of decorative paints APPLICATION PROCEDURE Add 3 part of WHITPLAST RF to 1 part of water in suitable container and blend it properly with electric blender to get lump free paste then apply on prepared substrate with the help of putty trowel. ADVANTAGES Reduces paint consumption Resistance to peeling No flaking No Blistering No Chalking Provides stain free surface Good breathability http://www.redwopchemicals.co.in/whitplast-sf-polymer-and-white-cement-based-smooth-putty.htm http://www.redwopchemicals.co.in/whitplast-sf-polymer-and-white-cement-based-smooth-putty.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Ceilings RCC surfaces Repair works Smoothing of walls for both indoor and outdoor Renders a smooth and durable surface Under layer for all kinds of decorative paints APPLICATION PROCEDURE Add 3 part of WHITPLAST SF to 1 part of water in suitable container and blend it properly with electric blender to get lump free paste then apply on prepared substrate with the help of putty trowel. ADVANTAGES Water-resistant Excellent adhesion to host substrate Smooth finish No Blistering & Chalking Provides stain free surface Good breathability http://www.redwopchemicals.co.in/epkote-ep-lv-epoxy-putty-for-cracks-filling.htm http://www.redwopchemicals.co.in/epkote-ep-lv-epoxy-putty-for-cracks-filling.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA In concrete repair works To smoothen concrete and metal surface irregularities Filling small cracks APPLICATION PROCEDURE Mix the Resin and hardener thoroughly using slow speed mixture. Add the filler in small quantities to get the required consistency. Apply using putty knife on the prepared surface. ADVANTAGES Excellent adhesion Eco-friendly and non-toxic Solvent free Ease in application can be applied with putty blades No shrinkage which can be easily applied on vertical also http://www.redwopchemicals.co.in/primer-wb-interior-exterior-water-base-primer.htm http://www.redwopchemicals.co.in/primer-wb-interior-exterior-water-base-primer.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA On properly prepared interior and exterior surfaces such as Concrete Block/CMU, Cement Board siding, brick, plaster, drywall/gypsum board, wood, plywood Non-Ferrous Metals APPLICATION PROCEDURE Apply on coat of PRIMER WB by brushing after suitable thinning with water. Allow drying for 4 hours. Then apply recommended number of top coats. If significant dust or dirt accumulates on the primed surface, re-prime with a thin coat of PRIMER WB. ADVANTAGES Excellent adhesion bonds to substrate and binds dust Aggressive tack provides a tenacious bond to difficult substrates such as dens glass gold and other glass faced wall boards Fast drying increased flexibility for application schedule Fast and easy application by brush or roller http://www.redwopchemicals.co.in/mazikoat-anti-carbonation-coating-paint.htm http://www.redwopchemicals.co.in/mazikoat-anti-carbonation-coating-paint.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA To protect other cementitious substrates and masonry Anti-carbonation coating for new and existing structures Concrete storage tanks on external surfaces Bridge structures Coastal area structures APPLICATION PROCEDURE First apply primer coat over the substrate. Mix MAZIKCOAT well before use then apply using brush over the prepared surface. ADVANTAGES It resists efflorescence and lime blooming with good adhesion on all cement plasters. It hides surface undulations and fine surface cracks. UV resistant aliphatic acrylate gives resistance to long term weathering It contains special glass fibers to maintain anti-cracking properties http://www.redwopchemicals.co.in/arex-blizz-acrylic-emulsion-paint.htm http://www.redwopchemicals.co.in/arex-blizz-acrylic-emulsion-paint.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Helps to kill the growth of algae and fungus, and retain the initial beauty of your walls. Fights dust from settling on the walls, helping them retain its beauty. APPLICATION PROCEDURE Apply AREX BLIZZ with the help of brush/roller on the prepared surface. After first coat dry apply 2nd coat immediately. ADVANTAGES Excellent resistance to ultraviolet radiation. Advanced Anti-algal Formula Excellent Dirt Pick up Resistance Excellent sheen http://www.redwopchemicals.co.in/wolfex-acrylic-distemper.htm http://www.redwopchemicals.co.in/wolfex-acrylic-distemper.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA On internal and external wall plaster Bricks wall APPLICATION PROCEDURE Combine WOLFEX and glue as per requirement than colour with tints as per your demand of colors. Slowly add water to WOLFEX, mixing the contents thoroughly. Normally, 500-600 ml water is required for 1 kg WOLFEX. Apply 2-3 coats by brush, roller or spray with an interval of 4-6 hours between coats. ADVANTAGES Provides a tenacious bond to difficult substrates such as dense glass and other glass boards Fast drying Environment friendly Anti-chalking Increased flexibility for application schedule Easy application Water-based, contains no hazardous or flammable solvents Less odor having no noxious fumes http://www.redwopchemicals.co.in/thermo-mark-30m-thermoplastic-road-marking-resin.htm http://www.redwopchemicals.co.in/thermo-mark-30m-thermoplastic-road-marking-resin.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Bituminous road marking Kerbs stones Speed humps Airplane tracks Children play yards Parking areas APPLICATION PROCEDURE Place THERMO MARK 30M powder in road marking machine after heating it to 150°C to 200°C & place on the prepared surface ADVANTAGES Easy in application only site mixing water is needed Fast cure with excellent durability High bond strength Unique chemical composition enables this mortar to be more compact, thinner and stronger. http://www.redwopchemicals.co.in/barguard-water-based-primer-for-tmt-bars.htm http://www.redwopchemicals.co.in/barguard-water-based-primer-for-tmt-bars.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA It has excellent adhesion & bond on variety of substrates in both general industrial & marine uses on steel bar & RCC surface also. APPLICATION PROCEDURE Stir thoroughly before using & apply using proper brush. ADVANTAGES Structural steel Grills Machinery & equipment Piping etc. http://www.redwopchemicals.co.in/bitucote-bituminous-protective-coating.htm http://www.redwopchemicals.co.in/bitucote-bituminous-protective-coating.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA To provide a continuous barrier to the passage of water and water vapor Used to produce vapor barriers, damp proof courses, linings to potable water tanks and pipes, below ground concrete protection, concrete curing by water retention Corrosion protection to metal surfaces APPLICATION PROCEDURE Apply a full coat of BITUCOTE and allow to dry. Coverage rate should be approximately 3m² per liter. Apply a second coat of BITUCOTE at right angles to the first coat. ADVANTAGES Single component Easily and inexpensively applied; high coverage rate Tough and resistant to most naturally occurring chemicals Does not taint water Can be applied to damp concrete substrates http://www.redwopchemicals.co.in/metguard-single-component-epoxy-protective-coating.htm http://www.redwopchemicals.co.in/metguard-single-component-epoxy-protective-coating.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, sulphate, oxygen & water Protect the other cementitious substrate and masonry APPLICATION PROCEDURE METGUARD may be applied by the use of suitable brushes or rollers. All primed substrates should be treated with two coats of METGUARD. The first coat should be applied to all areas by the use of suitable brushes or rollers to achieve a uniform coating. The second coat of METGUARD should be applied exactly as detailed above. ADVANTAGES Anti-fungal, Anti-bacterial Excellent barrier to carbon dioxide, chloride ions, Sulphate, oxygen and water Highly UV resistant aliphatic acrylate gives Highly durable in all climatic conditions http://www.redwopchemicals.co.in/dampcoat-anti-efflorescence-coating.htm http://www.redwopchemicals.co.in/dampcoat-anti-efflorescence-coating.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA All exterior masonry surface subjected to water ingress Building roofs / terraces, parapets sunshades and exterior wall areas APPLICATION PROCEDURE Mix DAMPCOAT properly before using it and apply using brush on prepared surface in uniform coats ADVANTAGES High elongation and film thickness allows cracks bridging ability of up to 0.8 mm thickness Efflorescence, algal & alkali resistance Protection against carbon dioxides diffusion to improve life of a building Strong adhesion to masonry substrates http://www.redwopchemicals.co.in/epkote-et140-epoxy-tar-based-coating-for-steel.htm http://www.redwopchemicals.co.in/epkote-et140-epoxy-tar-based-coating-for-steel.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Provides protection to concrete and metal structures against corrosion from aggressive environments tanks above ground or in totally submerged conditions such as pipelines In sewage works, effluent plants and dock & harbour installations APPLICATION PROCEDURE Mix Resin & Hardner as per given weight ratio, then apply it on RCC/Other Substrate. ADVANTAGES Excellent resistance to all types of water Easily applied by brush or spray Provides long term corrosion protection No priming necessary in most cases Chemical and abrasion resistant Economic and versatile product http://www.redwopchemicals.co.in/gr-65-non-shrink-grout.htm http://www.redwopchemicals.co.in/gr-65-non-shrink-grout.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Grouting of base plates of turbines, compressors, boiler feed pumps etc. For anchoring a wide range of fixings these include masts, anchor bolts and fence posts APPLICATION PROCEDURE Make highly flow able paste mixing water powder in ratio of 0.18. ADVANTAGES GR-65 have no metallic iron contain to cause staining As it is free flowing grout it will provide high level of contact with load bearing areas Gaseous expansion system compensates for shrinkage and settlement in the plastic state Site batching variation can be reduced as this product comes in pre packed http://www.redwopchemicals.co.in/gr-45-non-shrink-free-flowing-grout.htm http://www.redwopchemicals.co.in/gr-45-non-shrink-free-flowing-grout.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA In heavy duty support beneath load bearing structure In heavy reciprocating equipment's, compressors, pump sets, pulverizing mills, metal shearing APPLICATION PROCEDURE Add water as per requirement between 4.5 to 4.75 liters per 25 kg bag. Place the grout within 20 minutes of mixing to gain full benefit of the expansion process. Start curing when grout reaches 'touch-hard' and cure properly for at least 7 days. ADVANTAGES Ease in application Excellent adhesion to most of the exterior surfaces Balanced mechanical properties Gives excellent water Resistance http://www.redwopchemicals.co.in/polygrout-acrylic-grout-admixture.htm http://www.redwopchemicals.co.in/polygrout-acrylic-grout-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Ceramic, Vitrified tile, Marble, Granite In exterior application to resist freezing and thawing action APPLICATION PROCEDURE Mix tile grout powder to POLYGROUT and add water as per requirement. Apply the prepared mix to the tile joints with the help of trowel and remove surplus grout simultaneously. ADVANTAGES Highly water resistant Increases grout flexibility Easy to clean Produces high performance grout Natural antibggtorial http://www.redwopchemicals.co.in/eptile-epoxy-tile-grout.htm http://www.redwopchemicals.co.in/eptile-epoxy-tile-grout.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Wall, floor, swimming pool tile joints Food and bevrage factories Indoor and outdoor joints APPLICATION PROCEDURE Mix base, hardener and filler in given propertion than apply directly on prepared joints with the help of trowel & after 30 minutes remove the extra surplus with the help of sponge. ADVANTAGES Satin free attractive joints Easy in maintenance and highly durable with chemical & temperature resistance properties High joint bond strength http://www.redwopchemicals.co.in/teratile-polymer-modified-grout-for-wall-and-floor.htm http://www.redwopchemicals.co.in/teratile-polymer-modified-grout-for-wall-and-floor.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Wall, floor Indoor and outdoor tiles / stones joints APPLICATION PROCEDURE Mix powder and water in approx. W/C= 0.3 properly than apply directly on prepared joints with the help of trowel and after 30 minutes remove the extra surplus with the help of sponge. Mix 200 ml of POLY GROUT admixture to increase strength and durability of tile joints. ADVANTAGES Satin free attractive joints Easy in maintenance and highly durable with chemical & temperature resistance properties High joint bond strength http://www.redwopchemicals.co.in/plastochem-hs200-superplasticizer-admixture.htm http://www.redwopchemicals.co.in/plastochem-hs200-superplasticizer-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA All type of high and low raise buildings RCC and PCC works Load bearing & Non loading bearing structure APPLICATION PROCEDURE The recommended dosage as per guidance is 0.60 to 1.20% of cementitious content. ADVANTAGES Reduce water cement ratio Produce high strength concrete Creates Impervious and dense concrete http://www.redwopchemicals.co.in/plastochem-r75-pc-based-high-range-superplasticizer-admixture.htm http://www.redwopchemicals.co.in/plastochem-r75-pc-based-high-range-superplasticizer-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Mass concreting works Concrete with high strength properties Self compacting concrete APPLICATION PROCEDURE The recommended dosage as per guidance is 0.60 to 1.00% of cementitious content. ADVANTAGES High reduction in water cement ratio Produces highly workable concrete Increase flexural and initial compressive strength http://www.redwopchemicals.co.in/plastochem-s15-pc-based-water-reducer-admixture.htm http://www.redwopchemicals.co.in/plastochem-s15-pc-based-water-reducer-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA All type of concrete works RCC and PCC works Loading and Non loading structure APPLICATION PROCEDURE The recommended dosage as per guidance is 0.60 to 1.20% of cementitious content. ADVANTAGES Reduce water demand in concrete Create high strength concrete To create Impervious and dense concrete http://www.redwopchemicals.co.in/redbrawn-601-pc-based-mild-performance-superplasticizer-admixture.htm http://www.redwopchemicals.co.in/redbrawn-601-pc-based-mild-performance-superplasticizer-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Mass concreting works Concrete with high strength properties Self compacting concrete APPLICATION PROCEDURE The recommended dosage as per guidance is 0.60 to 1.00% of cementitious content. ADVANTAGES High reduction in water cement ratio Produces highly workable concrete Increase flexural and initial compressive strength http://www.redwopchemicals.co.in/redbrawn-800-pc-based-high-performance-superplasticizer-admixture.htm http://www.redwopchemicals.co.in/redbrawn-800-pc-based-high-performance-superplasticizer-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Mass concreting works Concrete with high strength properties Self compacting concrete APPLICATION PROCEDURE The recommended dosage as per guidance is 0.60 to 1.00% of cementitious content. ADVANTAGES High reduction in water cement ratio Produces highly workable concrete Increase flexural and initial compressive strength http://www.redwopchemicals.co.in/redbrawn-400-pc-based-superplasticizer-admixture.htm http://www.redwopchemicals.co.in/redbrawn-400-pc-based-superplasticizer-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Mass concreting works Concrete with high strength properties Self compacting concrete APPLICATION PROCEDURE The recommended dosage as per guidance is 0.60 to 1.00% of cementitious content. ADVANTAGES High reduction in water cement ratio Produces highly workable concrete Increase flexural and initial compressive strength http://www.redwopchemicals.co.in/blockfast-ac100-accelerator-admixture.htm http://www.redwopchemicals.co.in/blockfast-ac100-accelerator-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 USES Precast concrete works Prestressed concreting AAC blocks APPLICATION PROCEDURE The recommended dosage as per guidence is 0.6 to 1.5% of cementitious content ADVANTAGES Concrete accelerator Easy & early mould release Smooth and glossy surface finishing http://www.redwopchemicals.co.in/polycote-cwp-admix-i-crystalline-waterproof-admixture.htm http://www.redwopchemicals.co.in/polycote-cwp-admix-i-crystalline-waterproof-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 USES Building Basement & foundations Sewage & water treatment plants, Highways, Dams & canals, Tunnels, Harbors and subway systems Water reservoirs, Concrete pipes, Parking structures, Pre-Cast, Cast-in-Place and Shotcrete applications Swimming pools, Retaining walls & sea defense walls, Jetty APPLICATION PROCEDURE The recommended dosage as per guidence is 1 to 2% of cementitious content ADVANTAGES Reduces penetration of water and other liquids Resists positive and negative side hydrostatic pressure Protects against sewage and industrial wastes It is compatible with most of concrete http://www.redwopchemicals.co.in/polycote-cwp-admix-p-crystalline-waterproof-admixture.htm http://www.redwopchemicals.co.in/polycote-cwp-admix-p-crystalline-waterproof-admixture.htm Fri, 17 Apr 2026 00:00:00 +0530 USES Building Basement, foundations, Sewage, water treatment plants, Dams, canals, Tunnels, Harbors Tunnel & subway systems, Water reservoirs, Concrete pipes & Parking structures, Pre-Cast, Cast-in-situ & Shotcrete applications Swimming pools, Retaining walls & sea defense walls Concrete with high strength properties APPLICATION PROCEDURE POLYCOTE CWP ADMIX (P) can be added in T.M. & mix it for 30 min at site before pouring concrete. Place concrete quickly & compact it well. Ensure complete curing with a REDICURE curing compound. ADVANTAGES Reduces penetration of water and other liquids Can seal hairline cracks up to 0.4 mm Resists positive and negative side hydrostatic pressure Protects against sewage and industrial wastes http://www.redwopchemicals.co.in/epkote-et140-epoxy-tar-based-coating.htm http://www.redwopchemicals.co.in/epkote-et140-epoxy-tar-based-coating.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Provides protection to concrete and metal structures against corrosion from aggressive environments tanks above ground or in totally submerged conditions such as pipelines In sewage works, effluent plants and dock & harbour installations   APPLICATION PROCEDURE Mix Resin & Hardner as per given weight ratio, then apply it on RCC / Other Substrate. ADVANTAGES Excellent resistance to all types of water Easily applied by brush or spray Provides long term corrosion protection No priming necessary in most cases Chemical and abrasion resistant Economic and versatile product http://www.redwopchemicals.co.in/epkote-pe280-high-performance-epoxy-resin-coating.htm http://www.redwopchemicals.co.in/epkote-pe280-high-performance-epoxy-resin-coating.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Use in production assembly areas, workshops, dairies, soft drink production and bottling plants, kitchens, showrooms etc. Suitable in wet working areas and where chemical spillage is likely, plating shops, processing plants, dye works etc. APPLICATION PROCEDURE Laitance deposits on new concrete are best removed by light grit blasting, mechanical scrabbling or grinding. The entire contents of the hardener container should be poured into the base container and the two materials mixed thoroughly, then add the color pot and mix for at least 3 minutes. The mixed EPKOTE PE280 should be applied to the prepared surface using airless spray, brush or lamb's wool roller ADVANTAGES Hard wearing surface Durable floorings Low maintenance costs High resistance to a wide range of industrial chemicals Available in a range of colors http://www.redwopchemicals.co.in/zincrich-anti-corrosive-primer.htm http://www.redwopchemicals.co.in/zincrich-anti-corrosive-primer.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION PROCEDURE Mixing the contents of both the base and hardener have to be thoroughly stirred to disperse any settlement which may occur during storage. The entire contents of the hardener have to be mixed into the base and mix mechanically.   ADVANTAGES Combats corrosion Permanent protection to the steel structures Excellent adhesion to steel Time Saving-touch dry after 15 to 20 Minutes Exhibits excellent bond strength in cementatious repair. http://www.redwopchemicals.co.in/microcon-rgl-polymer-repair-mortar.htm http://www.redwopchemicals.co.in/microcon-rgl-polymer-repair-mortar.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA For repairs to damaged reinforced concrete elements particularly where access is restricted and where vibration of the placed material is difficult or impossible Suitable for various structural strengthening measures such as filling honeycombs and cracks APPLICATION PROCEDURE Mix thoroughly MICROCONE RGL powder & water in water cement ratio in 0.16 to 0.18 & apply using pump on the prepared surface. ADVANTAGES Gaseous expansion system compensates for shrinkage and settlement in the plastic state Can be pumped or poured into restricted locations Highly fluid to allow for placement without vibration Pre-packed to overcome site-batched variations http://www.redwopchemicals.co.in/microcon-100pt-polymer-repair-mortar.htm http://www.redwopchemicals.co.in/microcon-100pt-polymer-repair-mortar.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Vertical and overhead repairs General concrete and masonry repairs Voids greater than 10 mm deep APPLICATION PROCEDURE Mix thoroughly MICROCONE RGL powder and water in water cement ratio in 0.18. ADVANTAGES Saving time and expense of multiple applications Obviates the need for formwork Polymer-modification provides extremely low permeability to water, carbon dioxide and chlorides. Excellent bond to the concrete substrate http://www.redwopchemicals.co.in/microcone-uw-polymer-repair-mortar.htm http://www.redwopchemicals.co.in/microcone-uw-polymer-repair-mortar.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Repair deteriorated underwater or tidal zone Concrete Structures Quay Pillars, Bridge columns, Concrete Piling, Dams APPLICATION PROCEDURE Open MICROCONE UW Bag into mixture & add required amount of water slowly it While Mixing. Mix it properly for 5 min until smooth paste is Obtain & Place it. ADVANTAGES Displaces Water Effectively Low Porosity High Bond Strength Increase Durability http://www.redwopchemicals.co.in/microcone-m90-polymer-repair-mortar.htm http://www.redwopchemicals.co.in/microcone-m90-polymer-repair-mortar.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA For repairs to damaged reinforced concrete elements For various structural strengthening measures APPLICATION PROCEDURE Add MICROCONE M90 bag into forced-action mixture & then add Required amount of water & mix properly to make slurry & Paste it. ADVANTAGES Gaseous expansion system compensates for shrinkage and settlement in the plastic state. Highly fluid to allow for placement without vibration. Low permeability, Economical Contains no chloride http://www.redwopchemicals.co.in/plugfast-leak-plugging-mortar.htm http://www.redwopchemicals.co.in/plugfast-leak-plugging-mortar.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Rapid temporary patching and plugging of concrete segments Concrete and brick tunnel linings Sewage systems Foundations and mines APPLICATION PROCEDURE PLUGFAST should be added to clean water & Mix to a stiff consistency in a suitable container using a trowel or gloved hand. Trowel apply or hand-knead the mixed mortar in place, ensuring maximum contact with the substrate before the material sets. ADVANTAGES Emergency water stopping capability Excellent bond to the substrate Low exothermal minimizes thermal cracking Contains no chloride admixtures http://www.redwopchemicals.co.in/quickset-prm-4h13-fast-setting-patch-repairing-mortar.htm http://www.redwopchemicals.co.in/quickset-prm-4h13-fast-setting-patch-repairing-mortar.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA To repair damaged horizontal concrete elements airport runways, expressways, highways, bridge decks, sidewalks, parking decks, loading docks and floor. In vertical concrete repairing works after doing proper formwork. APPLICATION PROCEDURE QUIKSET PRM 4H13 is thoroughly mixed in a forced-action mixer of adequate capacity. The quantity water required will generally be between 3.5 to 3.75 liters per 25 kg bag of QUIKSET PRM 4H13. ADVANTAGES Ease in application High early strength and fast setting Pre-packed to overcome site-batched variations. Excellent adhesion property with old concrete substrate Economical and durable http://www.redwopchemicals.co.in/primer-us60-colorless-solvent-based-liquid-primer.htm http://www.redwopchemicals.co.in/primer-us60-colorless-solvent-based-liquid-primer.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Primer for polysulphide or polyurethane based joint sealants subjected to both important stresses and movements or cyclical conditions Treatment for porous surfaces, such as concrete, bricks, etc. APPLICATION PROCEDURE PRIMER US60 is applied on the surface with brush or roller, it should be of small thickness uniformly. Avoid excessive film thickness and heavy application or puddling. Primer application should be protected from dust, humidity and dirt for as long as drying last. ADVANTAGES Works on tensile and shear strength, or both Possesses good coverage Excellent adhesion to concrete and metal surface Preserves natural color and texture of created material http://www.redwopchemicals.co.in/blockfix-light-weight-block-joining-mortar.htm http://www.redwopchemicals.co.in/blockfix-light-weight-block-joining-mortar.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA AAC blocks joining works Stretcher block, Corner block, Pillar block joining works Red bricks APPLICATION PROCEDURE Mix approx. 11.2 liter of water in 40 kg powder and make a consistence workable paste and start applying to join blocks with the help of notch trowel to ensure good bonding. It will bond 40 blocks (900mm x 200mm x 150 mm) in 40 kg bag. ADVANTAGES Highly durable Resistance to rain and other harsh environment condition Long lasting and resistance to discoloration High coefficient of cohesion Resistance to gasoline and water Quick drying http://www.redwopchemicals.co.in/epfloor-nf40-resin-rich-epoxy-floor-screed.htm http://www.redwopchemicals.co.in/epfloor-nf40-resin-rich-epoxy-floor-screed.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Non-slip finish for personnel and vehicular traffic Floor topping with exceptional resistance, Heavy engineering plants chemical handling & process areas, steelworks Areas of lighter duty where above average durability and low maintenance costs are required APPLICATION PROCEDURE Add the aggregate slowly to the mixed resin & hardener, continue mechanical mixing for a further 2-3 minutes, until all the components are thoroughly blended. The mixed EPFLOOR NF40 (MTR) should be spread to uniform thickness on the primed surface using a steel trowel. ADVANTAGES Resistance to abrasion and to a wide range of chemicals Good gripping surface to both vehicular and pedestrian traffic A wide performance variety of aggressive locations    http://www.redwopchemicals.co.in/superkot-heavy-duty-reinforced-acrylic-water-proof-coating-for-terrace.htm http://www.redwopchemicals.co.in/superkot-heavy-duty-reinforced-acrylic-water-proof-coating-for-terrace.htm Fri, 17 Apr 2026 00:00:00 +0530 SUPERKOT is a heavy duty terrace waterproofing system, composed of specially developed highly elastic and resilient acrylic polymers, properly selected & graded fillers, lightfast & weather durable pigments, additives and best quality fungicidal in water medium. It is used as a liquid applied waterproofing membrane for all types of building terraces. SUPERKOT N is a three-layer system with coats in different colors ensuring proper build-up of the thickness, making it a reliable waterproofing system.   Uses Building roofs / Terraces– Flat & slope RCC Structure Masonry Walls of all types low and high rise buildings Cooling Tower Bridges Over existing cementitious waterproofing treatments like brick-bat coba & Concrete Screeds   Advantages Provides higher dry film thickness of minimum 1 mm in three coat application Crack bridging – Good Bridges cracks Can be used for flat as well as sloping roofs Forms highly elastic & resilient coating so helps to withstand the structural movements Abrasion resistant – No additional protective coating is required for roof subjected to foot traffic Can be applied by brush & roller easily Temperature reduction by 8 to 90C @ 450C Surface temp Light in weight does not add extra weight over the roof Toxicity It is Non-toxic in nature, Eco-friendly http://www.redwopchemicals.co.in/crack-filler.htm http://www.redwopchemicals.co.in/crack-filler.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/portland-cement.htm http://www.redwopchemicals.co.in/portland-cement.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/release-agent.htm http://www.redwopchemicals.co.in/release-agent.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/sealing-tape.htm http://www.redwopchemicals.co.in/sealing-tape.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/water-repellent.htm http://www.redwopchemicals.co.in/water-repellent.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/butywon-butyl-based-leak-proof-flashing-tap.htm http://www.redwopchemicals.co.in/butywon-butyl-based-leak-proof-flashing-tap.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Joints in various surface such as Metal, Cement, Concrete, Asbestos, Fiber, Polycarbonate, Plastic, Glass, Vinyl etc. Prevent leakages, Cover cracks ADVANTAGES Excellent UV Resistance Remains flexible throughout its service life http://www.redwopchemicals.co.in/flashtrip-self-adhesive-bituminous-strip.htm http://www.redwopchemicals.co.in/flashtrip-self-adhesive-bituminous-strip.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA For sealing frames & skylights, parapets, glass & plastic structure For protecting: metal, plastic, asbestos cement, roofs and coverings in general For repairing: tiles, gutters, metal pipes, metal plate or asbestos cement roofs ADVANTAGES Easy to fix and compatible with most building material. Cold applied, doesn't require heat or chemical bonding agents. http://www.redwopchemicals.co.in/redwop-sealex-66-flexible-sealing-tape.htm http://www.redwopchemicals.co.in/redwop-sealex-66-flexible-sealing-tape.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION PROCEDURE Joint waterproofing tape for wall, floor junctions & movement joints. It is applied with tiles and natural stones For flexible waterproofing joints. ADVANTAGES Ideal for sealing and waterproofing Excellent resistance to weathering UV radiation and chemically stable http://www.redwopchemicals.co.in/silicorep-wr200-silicone-based-water-repellent.htm http://www.redwopchemicals.co.in/silicorep-wr200-silicone-based-water-repellent.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Natural and artificial stones Mangalore tiled roofs Corrugated AC sheet roofing, etc. Concrete, mortar Clay brick surfaces APPLICATION PROCEDURE SILICOREP WR200 should be diluted with water ratio of 1:9 to 1:14. Apply one liberal coat of SILICOREP WR200 by brushing on the prepared surface. Dry the Surface minimum for 24hrs. Apply second coat wet on wet, to improve the penetration rate & performance. ADVANTAGES Clear coating does not stain the treated surface Not change the appearance of exterior decorative coating Prevent efflorescence Due to low viscosity penetration is high, which provides the hydrophobic zone http://www.redwopchemicals.co.in/silicorep-s500-colorless-solvent-based-water-repellent.htm http://www.redwopchemicals.co.in/silicorep-s500-colorless-solvent-based-water-repellent.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA To get Water repellent surface To get Self-cleaning properties To reduce efflorescence APPLICATION PROCEDURE Apply one liberal coat of SILICOREP S500 by brushing on the prepared surface. Dry the Surface minimum for 24hrs. Apply second coat wet on wet, to improve the penetration rate & performance. ADVANTAGES Equally effective on old or new surfaces Protects brickwork Protects concrete Self-cleaning http://www.redwopchemicals.co.in/redseal-aci-crack-filler-acrylic-sealant.htm http://www.redwopchemicals.co.in/redseal-aci-crack-filler-acrylic-sealant.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA In place of Joints between concrete and brickwork Joints between aerated concrete Joints between wooden and metal window frames to prevent dampness APPLICATION PROCEDURE Place sealant directly into joint with the help of trowel perfectly ensuring that joints are packed completely. ADVANTAGES Can be used indoor as well as outdoor works also Fast setting, non-staining & provide flexible seal Provides very smooth surface finish Eco friendly Suitable for different substrate like concrete, wood, aluminum Better adhesion to the surface http://www.redwopchemicals.co.in/remol-chemical-mould-release-agent.htm http://www.redwopchemicals.co.in/remol-chemical-mould-release-agent.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA To provide quick, clean and easy stripping of moulds, and formwork & ensure high quality fair-faced & stain free concrete APPLICATION PROCEDURE REMOL can be applied by brush, sponge or conventional mould oil-sprayer. Stir the contents of the container thoroughly before use. Apply one coat of REMOL thinly & evenly over the entire surface. ADVANTAGES Minimizes surface blemishes and staining Ensures easy release, good fair-faced concrete Minimizes cleaning of shutters before re-use Reduces opportunity of damage to formwork, extending usable life http://www.redwopchemicals.co.in/remol-extra-concentrated-and-emulsified-chemical-mould-release-agent.htm http://www.redwopchemicals.co.in/remol-extra-concentrated-and-emulsified-chemical-mould-release-agent.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA For easy and stain free release of concrete moulds and formwork of all types Wooden formwork is used and demolding or stripping times exceed 24 hours APPLICATION PROCEDURE First dilute REMOL EXTRA concentrate in the proportion of 1:6 with water, using a clean container and stirring thoroughly until evenly mixed. Apply the REMOL EXTRA 1:6 water dilution to the face of the formwork by spray, brush or cloth. Only one coat should be applied. ADVANTAGES Produces really fair faced finish concrete Reduces storage and transport costs Aids corrosion inhibition No cleaning of unsightly oil stains if plastering is not required http://www.redwopchemicals.co.in/seal-crack-non-shrink-cementitious-crack-sealer.htm http://www.redwopchemicals.co.in/seal-crack-non-shrink-cementitious-crack-sealer.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Ready to use crack filling paste for internal & external surface cracks APPLICATION PROCEDURE SEAL CRACK shall be mixed with water adopting w/p ratio 0.36 by weight or a mix proportion of 1 part of water to 2.5 - 3.0 parts of SEAL CRACK, by volume then apply on the groove directly with the help of trowel. ADVANTAGES Can be used for plaster, masonry or concrete, can be painted after application For horizontal, vertical and overhead applications Effective bonding with substrate Shrinkage cracking eliminated UV resistant For non-moving cracks up to 5-6 mm wide in plasters and walls http://www.redwopchemicals.co.in/redwop-pozo-portland-cement.htm http://www.redwopchemicals.co.in/redwop-pozo-portland-cement.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA In specially designed concrete In mortar In cement grout In blended cement APPLICATION PROCEDURE The optimum dosages of REDWOP POZO can be decided on the basis of requirements of structure by concrete designer as per mix design. ADVANTAGES It can be used to replace cement in concrete compatible with almost all concrete admixture Reduce heat of hydration in mass concrete It can be used to produce sulphate resistance concrete In water retaining structure Protect steel reinforcement more efficiently Provide higher resistance to chloride ingress Increase strength of concrete Increase strength http://www.redwopchemicals.co.in/redwop-creka-n-portland-cement.htm http://www.redwopchemicals.co.in/redwop-creka-n-portland-cement.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA High performance concrete Precast concrete Spray applied concrete APPLICATION PROCEDURE Dosage can be adjusted to meet various mix design requirements or to specific job site conditions. Trial concrete or grout mixes must be carried out to determine the appropriate dosage. Typical dosage is between 2% and 8% of cement content. ADVANTAGES Precast works Produces high early and higher ultimate compressive strengths Eliminates steam curing, saving on heating costs Shotcrete usage Less material wastage and greater efficiency of product use High impermeability and significantly less rebound loss Protects reinforcing steel from corrosion Improved bonding strength Thicker applications with each nozzle pass & enhanced pumpability http://www.redwopchemicals.co.in/polyurethane-sealant.htm http://www.redwopchemicals.co.in/polyurethane-sealant.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/redwop-teratile-classic-tile-adhesive.htm http://www.redwopchemicals.co.in/redwop-teratile-classic-tile-adhesive.htm Fri, 17 Apr 2026 00:00:00 +0530 Teratile Classic is single component normal cement based tile adhesive. It is composed of ordinary Portland cement, properly selected & graded aggregates & polymers. http://www.redwopchemicals.co.in/epfloor-mm2-2mm-thick-epoxy-self-levelling-flooring.htm http://www.redwopchemicals.co.in/epfloor-mm2-2mm-thick-epoxy-self-levelling-flooring.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Kitchens, food & beverage production Living room, Laboratories & clean room Industrial Floorings either bearing heavy load or general loadings APPLICATION PROCEDURE Laitance deposits on new concrete are best removed by light grit blasting, mechanical scrabbling or grinding. All surfaces to be treated with EPFLOOR MM2 should be primed with PRIMER 25. Mix EPFLOOR MM2 flooring as per pre-weighed packs (base, hardener, aggregate & color pack) which are ready for immediate on-site mixing. It should be spread to the required thickness using a serrated trowel with care taken not to overwork the resin, spreading evenly and slowly. Immediately after laying, the material should be rolled, using a spiked nylon roller to remove slight trowel marks and to assist air release. ADVANTAGES Fast application will minimizes downtime Good resistance to a wide range of chemicals Good abrasion resistance create durable floors http://www.redwopchemicals.co.in/silcore-wr100-silicone-based-water-repellent-for-exterior.htm http://www.redwopchemicals.co.in/silcore-wr100-silicone-based-water-repellent-for-exterior.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Natural and artificial stones Mangalore tiled roofs Corrugated AC sheet roofing, etc. Concrete, mortar Clay brick surfaces APPLICATION PROCEDURE SILICOREP WR100 should be diluted with water ratio of 1:9 to 1:14. Apply one liberal coat of SILICOREP WR100 by brushing on the prepared surface. Dry the Surface minimum for 24hrs. Apply second coat wet on wet, to improve the penetration rate & performance. ADVANTAGES Clear coating does not stain the treated surface Not change the appearance of exterior decorative coating Prevent efflorescence Due to low viscosity penetration is high, which provides the hydrophobic zone http://www.redwopchemicals.co.in/rust-remover-and-cleaning-compound.htm http://www.redwopchemicals.co.in/rust-remover-and-cleaning-compound.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/redseal-polyurethane-sealant.htm http://www.redwopchemicals.co.in/redseal-polyurethane-sealant.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Precast elements Parapets External walling Culverts of bridge Curtain walling and cladding APPLICATION PROCEDURE Firmly extrude sealant into the joint with the help of gun making sure that it is in full contact with the sides of the joint. ADVANTAGES Non corrosive to metal Pitch-free over paintable Movement capability 25% Bubble-free curing, no weak areas for air bubbles to develop Excellent resistance to weathering (DIN 14231) http://www.redwopchemicals.co.in/primer-25-epoxy-resin-based-primer.htm http://www.redwopchemicals.co.in/primer-25-epoxy-resin-based-primer.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Primer on mineral substrates such as concrete and cementitious screed Can be applied on pre-cleaned oil contaminated and wet matt substrates APPLICATION PROCEDURE Mix base and hardener in given proper than apply directly on prepared surface with the help of brush or roller. ADVANTAGES Easy to apply Excellent penetration Seals pores and capillaries Excellent bond to substrate High moisture tolerance http://www.redwopchemicals.co.in/redoflex-polysulphide-sealant-pouring-grades.htm http://www.redwopchemicals.co.in/redoflex-polysulphide-sealant-pouring-grades.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Precast elements External walls Curtain walling and cladding Panel walls Window and door perimeter APPLICATION PROCEDURE For Gun grade properly mix the paste before and fill in the gun and firmly extrude in the prepared substrate. For pouring grade mix the base and hardener properly in given proportion and directly pour over the groove ADVANTAGES Forms a tough, elastic, rubber-like seal Accommodates continuous and pronounced cyclic movement Excellent adhesion to most common substrates, including primed concrete, glass, aluminum and stainless steel http://www.redwopchemicals.co.in/reclean-rust-remover.htm http://www.redwopchemicals.co.in/reclean-rust-remover.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Removal of mortar, plaster runs, droppings, stains from brickwork, concrete surfaces, and hardened concrete from tools, machinery and equipment, or rust and mill scale from steelwork APPLICATION PROCEDURE Cleaning brickwork: Small trial area should be cleaned with suitable RECLEANER should be selected and rubbed. Cleaning large items of equipment: Liberally apply to the deposits by a soft broom and allow to soak overnight. Cleaning small tools: Use as a dip. The tools should be soaked overnight, then taken out and washed with clean water to remove all loosely adhering materials Cleaning concrete floors: In Pre-wet the floors use a stiff bristle broom, brush the affected areas with RECLEANER. http://www.redwopchemicals.co.in/recleaner-100-tile-surface-cleaner.htm http://www.redwopchemicals.co.in/recleaner-100-tile-surface-cleaner.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Removal of mortar, plaster runs, droppings, stains from tile surface Etching of tile surface Tile / stone works APPLICATION PROCEDURE Cleaning tile back surface Small trial area should be cleaned with suitable TILECLEANER 100 should be selected and rubbed. Then after getting result proceed the process as same. ADVANTAGES Rapid action Prolong life of tiles Makes good adhesion between tile substrate & tile adhesive both Ease in application http://www.redwopchemicals.co.in/redwop-dc150-rust-converter.htm http://www.redwopchemicals.co.in/redwop-dc150-rust-converter.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA As a rust remover from steel bars prior to encasing in Concrete /Micro concrete Steel surfaces prior to coating with epoxy systems APPLICATION PROCEDURE Applying REDWOP CI 150 with brush for complete wetting of rusted metal surface and allowed to react for 16-24 hours. ADVANTAGES Rapid Action Ease in Use http://www.redwopchemicals.co.in/corefix-core-fixing-epoxy-grout.htm http://www.redwopchemicals.co.in/corefix-core-fixing-epoxy-grout.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA To fill the gap between pipe & casing. To avoid longterm deterioration of pipe. Grouting of base plates of turbines, compressors, boiler feed pumps. APPLICATION PROCEDURE Pour all the resultant liquid into a container with a capacity of 10 liters. Add all the filler provided for each product. Mix. Using a slow speed power mixer for 2 minutes or until a uniform colour is achieved in the grout. ADVANTAGES To provide additional support & protection to the pipeline. High compressive, tensile and flexural strengths. Fast, convenient installation with early strength gain. Applicable on both vertical & horizontal direction. http://www.redwopchemicals.co.in/steelguard-zinc-based-anti-corrosive-coating.htm http://www.redwopchemicals.co.in/steelguard-zinc-based-anti-corrosive-coating.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION PROCEDURE Corroded steel shall be fully exposed and all loose scale and corrosion deposits shall be removed. The corrosion due to presence of chlorides on the steel should be cleaned with water at very high pressure and allowed to dry. STEELGUARD is used as a primer on reinforced bars for anticorrosive system, on exterior surfaces of machinery, fertilizers tanks, and girders in industries. STEELGUARD may be applied by the use of suitable brushes or rollers. All substrates should be treated with two coats of STEELGUARD.. The first coat should be applied to all areas by the use of suitable brushes or rollers to achieve a uniform coating with wet film thickness not less than 175 microns. The second coat of STEELGUARD should be applied exactly as detailed above, again achieving a wet film thickness not less than 175 microns. ADVANTAGES Combats corrosion Permanent protection to the steel structures Excellent adhesion to steel Time Saving-touch dry after 15 to 20 Minutes Exhibits excellent bond strength in cementatious repair http://www.redwopchemicals.co.in/rep-65cm-epoxy-resin-free-flow-grouts.htm http://www.redwopchemicals.co.in/rep-65cm-epoxy-resin-free-flow-grouts.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/bonding-adhesive-repair-compounds.htm http://www.redwopchemicals.co.in/bonding-adhesive-repair-compounds.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/reinforcement-strengthening-materials.htm http://www.redwopchemicals.co.in/reinforcement-strengthening-materials.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/butabond-sbr-latex-based-mortar-and-screed-modifier-bonding-agent.htm http://www.redwopchemicals.co.in/butabond-sbr-latex-based-mortar-and-screed-modifier-bonding-agent.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Waterproofing of small roof terraces, sunken portions of toilet & bathrooms, chajjas & lift pits, balconies & stair cases Liquid & effluent tanks, car deck and walk ways Repairs of plaster cracks more than 5 mm & in gaps developed between masonry and RCC members ADVANTAGES Prevents leakage & dampness It prevents cracking by improving flexural strength Reduces drying & aging shrinkage cracks Bonds strongly to concrete, masonry, stone work, plasters, steel, asphalt & most of the building materials http://www.redwopchemicals.co.in/fiber-glass-mesh.htm http://www.redwopchemicals.co.in/fiber-glass-mesh.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Areas near water bodies where hydrostatic pressure exist To repair patches of floors, ceiling and rendering walls Toilet bathroom and sunken portion APPLICATION PROCEDURE Cut the mesh with the help of knife in required length and width and place in the required areas where is necessary. ADVANTAGES Durable and flexible Easy embedment Easy in installation Ready to use Easy to cut with knife or scissors http://www.redwopchemicals.co.in/mattcem-s3-screed-concrete.htm http://www.redwopchemicals.co.in/mattcem-s3-screed-concrete.htm Fri, 17 Apr 2026 00:00:00 +0530 USES Mattcem S3 modified screeds are ideally suited for screeding large floor areas where in speedy execution of work can enable subsequent activity to be carried out, saving time and money. Some examples of application areas are: Airport Terminals, Public spaces & Shopping Mall University RCC flooring reworks or screeding works APPLICATION PROCEDURE Prepare the screed as per mixing ratio. MATTCEM S3: OPC S3G Cement: Sand: Water 500gm : 50kg : 65kg: 22kg Pour the mixed screed mortar onto the prepare surface using with a steel flat trowel. ADVANTAGES Early drying compared to traditional cement sand screed Reduced drying times: For bonded screed, tiles like ceramic can be laid after 24 hours using Proprietary adhesive. After 7 days dry, it is ready to receive natural stones, textile floor coverings, parquet flooring and resin coatings For interior & exterior use, Easier spreading & working of the screed Longer smoothing and floating time, No water curing is required but protection with PE-foil sheet recommended http://www.redwopchemicals.co.in/redcure-wb-wax-based-curing-compound.htm http://www.redwopchemicals.co.in/redcure-wb-wax-based-curing-compound.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA RCC surface Column beam surface Pre-stressed structures Irrigation channels and all Civil Engineering structures Industrial floor slabs APPLICATION PROCEDURE Stir thoroughly before use to ensure full dispersion of solids. Spray product in a fine mist to completely cover the concrete surface. Maintain the pressure in the application equipment to ensure a consistent spray. COMPLIANCE STANDARD BS 7542, ASTM C309 ADVANTAGES Single application No other curing necessary Reliable Ensure hard-wearing surface Easy and spray application http://www.redwopchemicals.co.in/adh-expon-high-strength-epoxy-bonding.htm http://www.redwopchemicals.co.in/adh-expon-high-strength-epoxy-bonding.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Tunnels & culverts, Hydroelectric power plants, Sewage treatment plants, Roof joints, Basements, Water retaining structures, Joints between rigid & flexible surfaces, Around iron, steel & cement pipes Repairing surface defects in concrete in horizontal, vertical and overhead applications Fining of injection ports for Master Inject resins, Bonding of dowels, bolts and anchors into concrete Rapid structural repair of concrete APPLICATION PROCEDURE Prime the surface if necessary with BUTABOND SBR mixed with cement. Mix the pack of part A and part B properly which is supplied in pre weight quantity. Apply the mix evenly with the help of trowel or spatula on the Prepared Surface. ADVANTAGES Low VOC makes it eco friendly High resistance to chemical resistance Highly adhesive to W-EXPON belt High resistance to aggressive environment Highly durable http://www.redwopchemicals.co.in/durcon-white-polypropylene-fibers.htm http://www.redwopchemicals.co.in/durcon-white-polypropylene-fibers.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Concrete blocks, Railway sleeper, manhole covers & tiles Roads & pavements Slabs, Footings, Foundation, walls and tanks Bridges & dams PCC & RCC plastering ADVANTAGES Increases flexibility of concrete Improves tensile and compressive strength Reduces water permeability Non-hazardous http://www.redwopchemicals.co.in/rediplast-ready-mix-plaster.htm http://www.redwopchemicals.co.in/rediplast-ready-mix-plaster.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA AAC, Fly Ash, Clay Brick, Stone & Concrete block walls Concrete Surfaces APPLICATION PROCEDURE Cleaning brickwork: Small trial area should be cleaned with suitable RECLEANER should be selected and rubbed. Cleaning large items of equipment: Liberally apply to the deposits by a soft broom and allow to soak overnight. Cleaning small tools: Use as a dip. The tools should be soaked overnight, then taken out and washed with clean water to remove all loosely adhering materials Cleaning concrete floors: In Pre-wet the floors use a stiff bristle broom, brush the affected areas with RECLEANER. ADVANTAGES High compressive and tensile strength increases masonry strength and load-bearing capacity Provides smooth finish walls even in a single coat Excellent Surface finish http://www.redwopchemicals.co.in/microcone-2a-4a-rapid-setting-liquid-material-for-fast-plugging.htm http://www.redwopchemicals.co.in/microcone-2a-4a-rapid-setting-liquid-material-for-fast-plugging.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Joint filling, pointing between concrete segments In construction joints For instant sewer connections APPLICATION PROCEDURE Place MICROCONE 2A into a rubber bowl and then add the fresh cement Stir briefly for a few seconds. Form the paste by hand into a tapered plug and place it immediately into the hole. ADVANTAGES In water retaining structure damage condition it acts as emergency water stopping Excellent bond to the substrate where applied Reduces thermal cracking Contains no chloride admixtures http://www.redwopchemicals.co.in/waterproofing-membrane-solutions.htm http://www.redwopchemicals.co.in/waterproofing-membrane-solutions.htm Fri, 17 Apr 2026 00:00:00 +0530 http://www.redwopchemicals.co.in/redgrout-pu-200-polyurethane-injection-resin.htm http://www.redwopchemicals.co.in/redgrout-pu-200-polyurethane-injection-resin.htm Fri, 17 Apr 2026 00:00:00 +0530   APPLICATION PROCEDURE  Identify the area to be injected. Install injection packers of suitable diameter and length. Ensure injection packers are tightly installed to avoid packer failure during injection process.    ADVANTAGES Non shrink grout Good penetration in to cracks Chemical resistance Long lasting Solvent free eco friendly  http://www.redwopchemicals.co.in/swelwop-hydrophilic-swellable-water-bar.htm http://www.redwopchemicals.co.in/swelwop-hydrophilic-swellable-water-bar.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA To seal construction joints Pipe, steel and pile cap penetrations through walls and base slabs ADVANTAGES Swells in contact with water Resistant against water and various chemical sub-stances Different types and dimensions available http://www.redwopchemicals.co.in/bituflash-app-polymer-modified-bituminous-waterproofing-membrane-sheet.htm http://www.redwopchemicals.co.in/bituflash-app-polymer-modified-bituminous-waterproofing-membrane-sheet.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Underground RCC construction Garden above ground Corrosion protection to metal surfaces APPLICATION PROCEDURE BITUFLASH are unfolded on the site and laid firmly on surface with tar based adhesives using blow torches. ADVANTAGES Asbestos free Easily and inexpensively applied Resistant to most naturally occurring chemicals Odorless and taint free when dry http://www.redwopchemicals.co.in/w-expon-ethylene-propylene-diene-monomer-belt.htm http://www.redwopchemicals.co.in/w-expon-ethylene-propylene-diene-monomer-belt.htm Fri, 17 Apr 2026 00:00:00 +0530 APPLICATION AREA Tunnels & culverts, Hydroelectric power plants, Sewage treatment plants, Roof joints, Basements, Water retaining structures, Joints between rigid and flexible surfaces, Around iron, steel and cement pipes, ventilated facades and window installations Large areas of concrete such as pavements, runways & bridge decks; also for vertical or sloping surfaces as on towers, chimneys, canal linings, columns & beams, where water curing is difficult or unreliable APPLICATION PROCEDURE W-EXPON sheet tension-free and in a way that movement of the connected building parts can be accommodated without damaging the membrane. Press the membrane sheet on the adhesive by a plastic roller. ADVANTAGES Highly flexible waterproofing and vapor control system Fast, easy and secure application even in corners Membrane pre-treatment free Suitable for uneven substrates (blowholes in concrete), leveling of substrate by adhesive Durable bond and barrier/seal Ozone- and UV-resistant Minimizes risk of drying shrinkage, cracks and dusty surfaces Non-toxic and nonflammable